Seawall Repair in Dania Beach, FL

Seawall repair in Dania Beach

Need seawall repair in Dania Beach? Walls on the Dania Cut-Off Canal and the Intracoastal take more boat wake than quiet inland canals, and the damage tends to show up at the cap and the joints first. We assess the wall on site and coordinate the repair with a licensed local seawall contractor.

Common seawall failures in Dania Beach

• Cracked or crumbling caps. See seawall cap repair.
• Open joints that let sand and soil escape, and the sinkholes that follow. See leaks, soil loss and sinkholes.
• Wake and scour at the toe on the busier waterways, which can let panels move. See panel and tieback failure.
• Low walls during king tides, which the city's code treats as a nuisance when tide water floods neighbors.

How the on-site assessment works in Dania Beach

We come out, walk the wall from the yard and, where we can, look at it from the water at low tide. We photograph cracks, joints, the cap line and the toe, probe soft ground behind the wall, and note what the repair will likely involve. On the Cut-Off Canal and the Intracoastal we pay close attention to the toe and any rock in front of the wall, since wake is often part of the cause. You get photos and a plain explanation, and we line up a licensed contractor who works in Dania Beach.

For the repair options behind each problem, see seawall repair methods and costs and the cost per linear foot guide.

Dania Beach sits between Fort Lauderdale and Hollywood, just south of Port Everglades. Its waterfront includes the Intracoastal Waterway, the Dania Cut-Off Canal and a network of smaller residential canals. Boat traffic near the port and the Intracoastal means more wake against walls than in quiet inland canals.

Dania Beach's seawall rules

Quick answers for Dania Beach: Dania Beach Seawall Height Requirement and Raise Deadlines; Do You Need a Permit to Repair a Seawall in Dania Beach?.

Dania Beach adopted the county-mandated seawall height standard on October 26, 2021 with Ordinance 2021-027. It created Article XVII, "Seawalls," in Chapter 12 of the city code and added Section 240-30 to the Land Development Code; the code's history note for Sec. 240-30 cites Ord. No. 2021-027 of October 26, 2021 (LDC Sec. 240-30). Section 240-30 states the rule directly: tidal flood barriers need a minimum elevation of 5 feet NAVD88, and applications for new or substantially repaired barriers submitted before January 1, 2035 may be permitted at 4 feet NAVD88 if designed and built to accommodate 5 feet by January 1, 2050 (LDC Sec. 240-30).

The city's "Build It High, Keep It Dry" notice adds that the rule treats tidal flooding as a public nuisance, and makes a practical point: one owner's higher wall does little if neighboring walls still let water through, which is why tying into adjacent walls matters on Dania's shared canals (City of Dania Beach). Because the city adopted the county model, the county's enforcement terms are the benchmark: a wall that lets tidal water onto a neighbor or the right-of-way can be cited, with 60 days to show progress and 365 days to finish (Broward County Code Sec. 39-407). Ask the city for the exact wording of its Article XVII before you plan around a deadline.

Seawall permits in Dania Beach

Structural seawall work goes through the city's Building Division, which takes the Broward County Uniform Building Permit Application and accepts electronic plan submittals. The division answers permit questions at 954-924-6805 or permitting@daniabeachfl.gov (Building Division). Broward County also requires a license before any work in, on, over or under county waters (Broward 311). A licensed contractor normally assembles the permit package, so ask for permitting to be listed in your quote. Confirm the exact rule for your address with the city or your contractor.

Many Dania Beach lots are compact, and some canals are narrow, so access for equipment is part of every plan. A contractor will look at whether the work is best done from the yard or from a barge.

Call or send photos with your street or neighborhood. A contractor will look at the wall and give you a written quote, free and with no obligation.

Planning work? Read our seawall rules by city, what to do after a seawall citation, seawall permits and who to call and the seawall cost guide.

Sources

1. Dania Beach Land Development Code Sec. 240-30: Seawalls (Municode)
2. City of Dania Beach: Build It High, Keep It Dry (regional seawall standard)
3. Broward County Code of Ordinances, Chapter 39, Article XXV, Resiliency Standards for Tidal Flood Protection, Secs. 39-404 to 39-408 (Municode)
4. City of Dania Beach Building Division
5. Broward County 311: Do I need a license to replace or repair my dock or seawall?