Seawall Repair in Pompano Beach, FL

Seawall repair in Pompano Beach

Searching for seawall repair in Pompano Beach? Walls near the Hillsboro Inlet and the busier stretches of the Intracoastal take more wave and wake than walls deep in the canals. We assess the wall on site and coordinate the repair with a licensed local seawall contractor.

Common seawall failures in Pompano Beach

• Scour at the toe near the inlet and on the Intracoastal, which can let panels kick out. See panel and tieback failure.
• Aging caps and spalled panels. See seawall cap repair.
• Open joints and settling behind the wall. See leaks, soil loss and sinkholes.
• Sudden failures after storms. See what to do after a collapse.

How the on-site assessment works in Pompano Beach

We come out, walk the wall from the yard and, where we can, look at it from the water at low tide. We photograph cracks, joints, the cap line and the toe, probe soft ground behind the wall, and note what the repair will likely involve. Pompano Beach requires engineer-prepared plans that show your wall and the walls next to it in NAVD88, so we note neighbor wall heights and conditions as part of the visit. You get photos and a plain explanation, and we line up a licensed contractor who works in Pompano Beach.

For the repair options behind each problem, see seawall repair methods and costs and the cost per linear foot guide.

Pompano Beach has miles of waterfront along the Intracoastal Waterway, from the Hillsboro Inlet at its northern edge down toward Fort Lauderdale. Residential canals branch off the Intracoastal on both sides, and inland neighborhoods sit on waters such as Lake Santa Barbara and the Cypress Creek canal. Homes, condos and marinas all rely on seawalls.

Pompano Beach's seawall rules

Quick answers for Pompano Beach: Pompano Beach Seawall Height Requirement: 5 Feet Minimum, 5 Feet 10 Inches Maximum; Pompano Beach Seawall Raise Deadline: When You Must Raise to 5 Feet; Do You Need a Permit to Repair a Seawall in Pompano Beach?.

Pompano Beach has one of the most detailed seawall codes in Broward. Chapter 151 regulates structures on waterways, and the city put its current tidal flood barrier standards in place in January 2022 (city flyer). Section 151.05 says (Pompano Beach Code Sec. 151.05):

• Height range. New and substantially repaired tidal flood barriers need a minimum of 5 feet and a maximum of 5 feet 10 inches NAVD88.
• Engineering. Plans must be prepared by a Florida licensed engineer, show your wall and the adjacent walls in NAVD88, and be approved by the City Engineer.
• Citation clock. A barrier that lets tidal water onto a neighbor or the right-of-way is a citable public nuisance, with 60 days to show progress and 365 days to get permits, build and pass final inspection.
• Dock work can trigger a raise. Barriers below 5 feet must be brought up to 5 feet when work on attached structures such as docks exceeds 50 percent of the cost, as determined by the City Engineer, of the barrier along the shoreline. The city says your contractor must submit a cost analysis, including the cost of raising the wall to 5 feet, whenever dock, piling or lift work is proposed on a wall below 5 feet (city flyer).
• Footprint. A new cap may extend no more than 36 inches seaward of the existing wet face, and a rebuilt wall generally has to stay within 12 inches of the old wet face unless the City Engineer approves more.
• Rip-rap. Tidal flood barriers need natural limerock rip-rap or another approved habitat feature on the water side.

Seawall permits in Pompano Beach

Because plans need City Engineer approval, seawall projects in Pompano Beach start with a Florida licensed engineer and a survey in NAVD88. The city takes seawall and dock questions at docksandseawalls@copbfl.com and keeps owner information at pompanobeachfl.gov/floodbarrier (city flyer). Structural seawall work also needs a Broward County license for work in county waters (Broward 311). Confirm the exact rule for your address with the city or your contractor.

Homes and associations

Whether you own a single home or manage a condo or HOA with a long run of wall, the first step is the same: tell us where the property is and what you are seeing.

We connect you with a licensed, insured contractor who serves Pompano Beach for an on-site look and a written quote, free and with no obligation.

Planning work? Read our seawall rules by city, what to do after a seawall citation, seawall permits and who to call and the seawall cost guide.

Sources

1. City of Pompano Beach Code Sec. 151.05: Tidal Flood Barriers
2. City of Pompano Beach: Build It High tidal flood barrier flyer (2024)
3. Broward County 311: Do I need a license to replace or repair my dock or seawall?